Pneumatic & Electric Tool


Plastic hubs with 5/8"–11 metal insert

Use with 3M™ Disc Pad Face Plates

For use with all 3M™ Disc Pad Face Plates, Disc Pads, and Disc Pad Hubs

Nuts have 5/8"–11 threaded arbor hole in three depths to accommodate grinder shaft length

Will convert a grinder with M10–1.25, M10–1.5, or 3/8"–24 external threaded shaft to a 5/8"–11 external threaded shaft

Backup plates for fibre discs

Color coded by density

Ribbed plates result in cooler running discs

Use harder face plates for

heavier stock removal applications

Used for securing 4-1/2" diameter flap discs or 4-1/2" and 7" flexible grinding wheels to right angle tool with a 5/8"–11 threaded shaft

Backup plate for 7" diameter type 27 flap discs

Required for safe operation of Flexible Grinding Wheels with 7/8" center hole

Rubber backup pads are available in different diameters and degrees of hardness for various grinding applications

Pads are internally threaded to receive any standard 1/4"–20 thread shaft

For use with 3M™ Roloc™ TSM discs and “screw on” abrasive discs

Efficiently clean and strip many substances from metal surfaces without damaging the work piece

An operator can quickly and easily achieve a quality, consistent finish with light pressure

Grade: 50 – Green; 80 – Yellow; 120 – White

Use harder face plates for heavier stock removal applications

For use with Scotch-Brite™ Surface Conditioning Discs

Lightweight pads have vinyl face for excellent disc adhesion with quick, easy disc removal

For use with 3M™ Stikit™ discs

Furnished complete with washers to fit available disc sizes

Supports 248D PSA disc

Can be used with any air or electric grinding tool that accommodates a 1/4" shank

Designed for use with Scotch-Brite™ Unitized Wheels

For use with 6" wheels

Telescoping wheel adapters 1" and 1/2" wide to reduce 1" wheel cores to fit 1/2", 5/8", 3/4", or 7/8" shafts

Must be used with side flanges

Five discs made of a durable web, ganged together on a shaft

Use for satin or antique finishing as well as light- to medium-duty cleaning applications

Choose from either 3M™ Roloc™+ or a 1/4" spindle mount attachment system

Screw-type mandrels for securing cartridge rolls to tool

Match pilot diameter with center hole of cartridge rolls

Slotted wheels for use with evenrun bands

Use with evenrun bands when creating fine finishes

Part numbers apply to complete wheel, not cushions

For attaching utility cloth strips

Use with Scotch-Brite™ hand pads

Provides increased leverage and eliminates “finger” marks

Use with desired Scotch-Brite™ strips to clean and polish inner diameters and other tight areas

Has a 1/4" shank to fit desired tool

3M™ Finesse-it™ Roloc™ Finishing Disc Pad is made with soft foam to provide greater conformability than standard 3M™ Roloc™ backup pads. The 3M™ Hookit™ surface is manufactured with mushroom headed hooks that hold the buffing pad firmly in place. This backup pad is designed to be used with rotary tools only. The foam backing provides good conformability.

Our 3M™ Finesse-it™ Hand Sanding Pad is crafted from durable rubber and designed to hold 3M™ Finesse-it™ sanding or finishing discs with pressure sensitive adhesive. The sanding pads are available in three different sizes to accommodate 1-1/4" or 1-3/8" discs

Our 3M™ Hand Pad allows you to use our Hookit™ discs with the precise control that only hand sanding can offer. Featuring our Hookit™ attachment system, abrasive discs can be easily swapped without coming loose during sanding, finishing or other hands-on applications.

The 3M™ Hookit™ Soft Hand Block attaches to corresponding Hookit abrasive sheets to give users a more nimble, precise way to tackle sanding jobs. This can be used by professionals or individuals looking to increase the speed and ease of jobs on flat surfaces or contours.

3M™ Hookit™ Hand Block helps level repair areas with greater ease. Use this accessory item with our Hookit™ abrasive products to achieve more consistent, uniform sanding results. Our hand block when used in combination with Hookit™ abrasives is ideal for achieving a true flat surface.

3M™ Soft Interface Disc Pad is constructed of ½ inch soft density foam with a 3M™ Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.

The 3M™ Hookit™ Low Profile Finishing Disc Pad is a soft density backup pad in 5 or 6-inch diameters for 5- and 6-inch abrasive discs. The soft density foam provides additional conformability and is ideal for final surface finishing applications following leveling and blending process steps.

Plastic holder for use with 3M™ Roloc™ Unitized Wheels

Use in conjunction with Scotch-Brite™ Stars for cleaning and polishing internal diameters of pipe and tubing

If you have any enquiries about our products or services, do not hesitate to get in touch with us.

Get In Touch

Sorry, your browser does not support inline SVG. Call Us At
Email Us